Door Message Signs
> No Food Or Drink Signs
> SE-2649

No Food Or Beverages with Graphic ShowCase™ Sign

Part#

SE-2649

SPN#

Size

3" x 10" (H x W)

Package

1 Sign

Material

Architectural Subsurface Printed Sign [MU-SHOW]

Printing

Screen Printing What is this?

Flexography

"Flexo" printing is the most common label printing method. Solvent, water and UV inks are available. Low cost plastic plates are used to transfer the ink to the base film. Many flexo presses allow the label manufacturer to print, laminate and die-cut the label in line and this makes flexography suitable for longer runs of labels. Most flexo labels are sold in a roll form. Examples of flexo labels include labels on detergent, toothpaste and certain RTK labels and paper tags. Typically, Flexo printing is not used when either large areas of solid color are needed nor if the label must last outdoors.

This traditional print method typically uses either a rotary bit or a high power laser. The rotary (or Pantograph) technique requires only a high speed spindle and a simple desk top engraver. The surface layer of the plastic or metal surface is removed and this exposes, typically, the contrasting color of the material core. In some cases, the engraved letter can also be filled. Laser or raster engraving is much more precise and can mimic most fonts. The laser burns or vaporizes the top layer away.

Two contrasting colors are permanently fused to each other, creating a slight profile between the layers. The TactileTouch method is also used to create Raster Braille ? dots follow the Grade II standards. Braille dots are precision cut and pressure fit, TactileTouch signs are used for Room ID, restroom signs, ADA door signs and Exit signage.

Screen printing is the most durable of all common printing techniques. This process "lays down" a very thick layer of pigment and this extends outdoor life. Both solvent and UV inks are common, with the UV inks imparting good chemical resistance. Most signs and pipe makers are screen printed. Other screen printed products include the design on a CD-ROMs, many automotive nameplates, the defrost screen on a car's rear window or the decoration on china plates.

Offset printing is the most common method of printing paper. Offset equipment and set-up costs are high, but, for long runs, offset printing is very fast and very inexpensive. Starting with an image that is etched onto a metal plate, ink is transferred to an intermediary surface such as a rubber blanket, and finally applied to paper or a tag substrate by pressing this substrate against the intermediary surface.

The print is sealed into the anodized layer of the aluminum. The print cannot be washed off. In addition, embedded black graphics are metallic silver particles that resist heat, chemicals and sunlight. Withstands up to 1000°F. Anodized/Photographic plates are commonly used by ships to identify equipment or by utilities to permanently mark poles. Anodized/Photographic plates are also ideal for one-of-a-kind signs and are commonly used for awards and dedication plaques.

Heat is used to transfer a resin or wax-based ink from a foil to the base film. Traditionally, thermal printing, often called "Hot Stamping", was accomplished using a heated platen and an impact head. In the 1970’s faster and lower-cost thermal transfer printers directed at the warehouse label, UPC and packaging markets emerged. In the 1990’s, lower-cost color thermal printers emerged. Resin ribbons were used to transfer colored inks to flexible label substrates.

Thermal printing is well suited for short-runs of labels and signs. One-of-a-kind information can be easily added to the label.

Digital printing has revolutionized the label market. The first commercial liquid toner presses were introduced in the late 80’s. Only recently, however, the economics and quality have changed to favor digital printing over most other techniques.

Our presses use up to seven colors simultaneously to produce both full color process labels, fluorescent colors, spot colors and, even, white. Art work does not need plates. The printing can be completely variable. Bar codes, serial numbers, etc. can be different on each label. The press handles both rolls and sheets of label materials. Our state-of-the-art can print runs of labels from a single label to 50,000. Labels are often overlaminated or digitally die-cut.

	Flexography Printing	Engraving	Braille ADA Appliqué	Screen Printing	Offset Printing	Anodized	Thermal Printing	Digital Printing
Outdoor Durable	limited	Outdoor signs available
Low Cost							(short runs)
Require Plates/Screen
Chemical Resistance	Good with laminate			excellent	Fair		Good with laminate	Good with laminate
Colors Available						limited	sometimes
One-of-a-kind
Typical Run Size	2,000+ labels	1 sign or plate	1 sign	250+ labels	1,000+ labels	50+ labels	10+ labels	10+ labels

Flexography
Engraving
Braille
Screen Printing
Offset Printing
Anodized
Thermal
Digital
Compare Techniques

ShowCase™ Wall Sign

No Food Or Beverages Please! (with Graphic)

Package : 1 Sign • Price per Sign

Minimum Qty. 1 • Order in Multiples of 1 Sign

1	2	3	5	10	15
$12.59	$11.96	$11.33	$10.70	$10.06	$8.80

Select Sign Color:

Quantity :
		Sign

Price per Sign:

You Save:

Select Sign Color
Burgundy	Forest Green	Red

Product Description

Convey your no food policy clearly with this bold and beautiful sign.

• Sign leaves no room for confusion.

• Beautifully designed sign grabs attention and leaves a lasting impression.

Material Features Show Specifications

Material: Architectural Subsurface Printed Sign [MU-SHOW]

• ShowCase™ signs feature subsurface graphics and an elegant border on thick acrylic. They are ideal for apartments, hotels, schools and offices.

• Order with magnetic strips or Hoop and Loop Fastner for fast installation. Or, for most sizes, order your ShowCase™ sign with a molded frame. Use our molded plastic frames for enhanced architectural appeal.

• Peel-and-stick foam adhesive included with every order.

• 125 mil thick (1/8" thick) signs are sturdy and stand up to abuse.

• ShowCase signs are primarily for indoor use, but can be used outdoors for approximately 3 years. It's recommended to mount the sign in an area that isn't constantly exposed to sunlight and on a smooth surface that is receptive to adhesive. Do not drill into the sign as it will crack.

Companion Products/Adders